Quantum Pizza Target Topping Applicator TC2
$14,995.00
Only: $14,995
All Prices ex GST
HUGE SAVINGS $$$ – SAVE THOUSANDS $$$
- Quickly deposit cheese, meat and vegetable toppings on pizza bases
Brand: Quantum
Product Code:: TC2
Description:
Power Type: Electric
Power Rating:: Single Phase
Product Origin: USA
Item Specifics: Used – Second-hand
Condition: Very Good VGC
Quantum Pizza Target Topping Applicator TC2
Quantum Pizza Target Topping Applicator TC2
Made in the USA
Can Deposit the following on pizza bases:
- Cheese
- Meat
- Vegetables
A mechanical unit known for it’s push-button reliability and analog adjustments.
Unlike waterfall models that coat the entire belt, the TC2 was designed to deposit toppings (like cheese, veggies, or IQF meats) onto the pizza , maintaining a clean, topping-free crust border.
Physical Dimensions & Weight:
Can be integrated with a Product Recirculation Conveyor
Overall Dimensions: Approximately L 1,320.8 mm x W: 1,676.4 mm x Height: 1,574.8 mm (52″ L x 66″ W x 62” H)
Belt Width: The top application belt is typically 17-3/4″ wide.
Conveyor Length: Top belt is 914.4 L; the lower (main) conveyor belt is usually 48” (1219mm) L x
Belt Height: Standard top belt height from the floor is 40-3/8″, but the frame allows for manual height adjustments.
Technical & Utility Specifications:
Configured for simpler electrical setups.
- Electrical: 230V, 50-60Hz, 1-Phase
- Control Interface: Physical push-button operation and analog variable speed control dials
- Pneumatics: Used primarily for the “No Pizza/No Fill” mechanical gate (80 PSI clean/dry air).
- Drive System: Standard washdown-duty AC motors with variable frequency drives (VFDs) for belt speed control.
Features:
- Mechanical Recirculation (RC3 System): Uses cleated belts (roughly 6-1/2″ wide) to physically lift excess topping from the bottom catch-pan back into the top hopper.
- Manual Rake Adjustment: Features a hand-cranked “rake” at the hopper exit to control the thickness of the cheese/topping curtain.
- Construction – Stainless Steel Tubular Frame: Square tubular stainless steel construction (older models utilised more square tubing .
- Targeted Funnels: Uses a mechanical indexing system or “following buckets” to drop ingredients into a specific radius, preventing waste on the conveyor edges.
Benefits:
- Easier Maintenance: Because the controls are largely electromechanical (relays and simple VFDs), they are often easier and cheaper to repair than the PLC-based systems that require proprietary software.
- Construction: Made from heavy-gauge stainless steel
- Durability: Built to last decades in harsh, wet environments
- Simplicity: Minimal training is required to operate the machine; there are no complex sub-menus or software recipes to navigate.
- Cost-Effective: In the used market, these machines provide the same “target topping” functionality as new models at a fraction of the capital investment.
SUMMARY TABLE:
- Power: 230V. 1 Phase
- Controls: Push Button / Analog – Dials
- Frame: Square Stainless Steel Tubing
- Recirculation: Model RC3 Cleated Belt
- Dimensions: 1320.8 mm L x 1676.4 mm W x 1574.8 mm H
The following may also be of interest:
GAM King 4 Stone Deck Pizza Oven
OEM Double Deck Conveyor Pizza Oven
Information obtained online, please check to confirm details are accurate & as specified.
This item may or may not include these features & should therefore be viewed as a general guide.
Sometimes generic product photos may be used, if you would like to see the actual unit being sold. Please request photos.
